|
Features
 The Sensor Monitor 5.0 (SM5) connect range is designed
to monitor up to eight channels equipped with different types of sensors
including photodiodes, temperature probes and many more. It has an RS232 output
for online data analysis
It features high precision input amplifiers,
customisable range, offset and linearity correction via display and keys, large
LCD with backlight, energy efficient DC power supply and standardised mounting
fixtures.
This module can be easily mounted to panels of any
width requiring just a rectangular mounting hole according to DIN 43700. It is
supplied with screw clamps.
The Sensor Monitor 5.0 connect double is just like the
connect but configured for the simultaneous use of two probes/photodiodes.
Features of the connect
|
UV intensity monitor |
|
UV dose monitor |
|
Single channel photodiode input |
|
Single channel 0 - 2.5V input (e.g. amplified photodiodes,
probes) |
|
Supply voltage range 12 V - 24 V DC with surge and polarity
protection |
|
Low power consumption |
|
RS232 output for online data analysis |
|
Various configurable dose or intensity controlled relay
functions |
|
Measurement ranges: UV index 0 - 40, intensity 0 - 1000
mW/cm², dose 0 - 109 GJ/cm², photo current 0 - 490 nA, relative
monitoring 0 - 100% |
|
Configurable units for intensity measurement
µW/cm², µW/m², mW/cm², mW/m², W/cm²,
W/m², kW/cm², kW/m², MW/cm², MW/m² |
|
Configurable units for dose measurement µJ/cm²,
µJ/m², mJ/cm², mJ/m², J/cm², J/m², kJ/cm²,
kJ/m², MJ/cm², MJ/m², GJ/cm², GJ/m² |
|
Backlit LC display |
|
3 keys to change display values and to set up customisable
parameters |
|
User defined parameters are stored in non-volatile
memory |
Please refer to the
Sensor Monitor 5.0
connect datasheet for more details of the Sensor Monitor 5.0 classic.
Features of the classic double
|
UV intensity monitor |
|
UV dose monitor |
|
Two channel 0 - 2.5V (e.g. amplified photodiodes, probes) or
photodiode input |
|
Supply voltage range 12 V - 24 V DC with surge and polarity
protection |
|
Low power consumption |
|
RS232 output for online data analysis |
|
Various configurable dose or intensity controlled relay
functions |
|
Measurement ranges: UV index 0 - 40, intensity 0 - 1000
mW/cm², dose 0 - 109 GJ/cm², photo current 0 - 490 nA, relative
monitoring 0 - 100% |
|
Configurable units for intensity measurement
µW/cm², µW/m², mW/cm², mW/m², W/cm²,
W/m², kW/cm², kW/m², MW/cm², MW/m² |
|
Configurable units for dose measurement µJ/cm²,
µJ/m², mJ/cm², mJ/m², J/cm², J/m², kJ/cm²,
kJ/m², MJ/cm², MJ/m², GJ/cm², GJ/m² |
|
Backlit LC display |
|
3 keys to change display values and to set up customisable
parameters |
|
User defined parameters are stored in non-volatile
memory |
Please refer to the
Sensor Monitor
5.0 connect double datasheet for more details of the Sensor Monitor 5.0
classic double.
Important Notes:
Please consider any possible action to protect the sensitive
photodiode input against electrostatic discharge (ESD). Not to do so may damage
the appliance and voids warranty.
Please also care that there is no ground loop on the photodiode
input connection as this may give wrong measurements.
|
Sensor Monitor 5.0
connect