The PE100BF-DIF-C is a large aperture pyroelectric energy meter with a removable diffuser. It has a 96mm aperture with diffuser off and 85mm aperture with diffuser on. It can measure energies from 0.4mJ up to 40J. It can operate at repetition rates up to 200Hz and is calibrated for 0.532, 1.064 and 1.55µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.
Please contact us for further information on this product.
 |
Scope AdapterPlugs in between the PE sensor and power meter. Provides BNC output to scope to see every pulse up to the maximum frequency of the sensor. |
 |
Beam Splitter Assembly for PyroBeam Splitter Assembly to measure pulsed laser sources too energetic for direct measurement. The reading with the Beam Splitter can be calibrated by setting the laser to a lower energy that will not damage the sensor and then taking a measurement with the beam splitter and without and taking the ratio. |
 |
Damage Threshold Test Plates (metallic)Test plates with same absorber coating as the sensor. For testing that laser beam is not above damage threshold (1such plate is included with sensor package). |
 |
Nova PE-C AdapterThe adapter plugs between the Nova D15 socket and the smart plug of the PE-C sensor to allow the Nova to operate with PE-C series sensors. See PE-C spec sheet for details. |
 |
3m Cable3m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable. |
 |
5m Cable5m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable. |
 |
10m Cable10m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable. |
