FPE80BF-DIF-C

FPE80BF-DIF-C

The FPE80BF-DIF-C is a pyroelectric energy meter that can measure high average power pulsed lasers up to 200W. It has a high damage threshold diffuser for concentrated beams. It has a 53mm aperture and can measure energies from 1mJ up to 40J. It has a damage threshold of 4J/cm² for ns pulses. It can operate at repetition rates up to 250Hz and covers the spectral range from 0.19 – 2.2, 2.94µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

Please contact us for further information on this product.

 
  • BF with diffuser
  • Ø53mm
  • 0.19-2.2µm, 2.94µm
  • 1mJ-40J
  • 250Hz
  • 90 L x 90 W x 127 D (mm)
  • 40J
  • 120W/cm²
  • 20 ms
  • 4J/cm²
  • 50J/cm²
  • 200W
Scope Adapter

Scope Adapter

Plugs in between the PE sensor and power meter. Provides BNC output to scope to see every pulse up to the maximum frequency of the sensor.

Beam splitter for PE and Thermal sensors

Beam Splitter Assembly for Pyro

Beam Splitter Assembly to measure pulsed laser sources too energetic for direct measurement. The reading with the Beam Splitter can be calibrated by setting the laser to a lower energy that will not damage the sensor and then taking a measurement with the beam splitter and without and taking the ratio.

PE Test Plates (metallic)

Damage Threshold Test Plates (metallic)

Test plates with same absorber coating as the sensor. For testing that laser beam is not above damage threshold (1such plate is included with sensor package).

Nova PE-C Adapter

Nova PE-C Adapter

The adapter plugs between the Nova D15 socket and the smart plug of the PE-C sensor to allow the Nova to operate with PE-C series sensors. See PE-C spec sheet for details.

3m Cable

3m Cable

3m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

Cable

5m Cable

5m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

10m cable

10m Cable

10m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.