PD10-IR-C

PD10-IR-C

The PD10-IR-C is a photodiode energy meter for low energies with a 5mm aperture. It can measure energies from 1nJ up to 600nJ. It can operate at repetition rates up to 10kHz and covers the spectral range from 0.7 – 1.8µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

Please contact us for further information on this product.

 
  • Ø5mm
  • 0.7-1.8µm
  • 1nJ-600nJ
  • 10,000Hz
  • Ø62 W x 22 D (mm)
  • 600nJ
  • 50W/cm²
  • 0.005 ms
  • 6mW

ST Fiber Adapter

This fiber adapter is used for connecting power and energy sensors to a standard ST-type fiber. Many sensors need an additional mounting bracket to connect to all fiber adapters. More information can be found in the datasheet below.

 

FC Fiber Adapter

This fiber adapter is used for connecting power and energy sensors to a standard FC-type fiber. Many sensors need an additional mounting bracket to connect to all fiber adapters. More information can be found in the datasheet below.

 

SMA Fiber Adapter

This fiber adapter is used for connecting power and energy sensors to a standard SMA-type fiber. Many sensors need an additional mounting bracket to connect to all fiber adapters. More information can be found in the datasheet below.

 

SC Fiber Adapter

This fiber adapter is used for connecting power and energy sensors to a standard SC-type fiber. Many sensors need an additional mounting bracket to connect to all fiber adapters. More information can be found in the datasheet below.

 PD10 Fiber Adapter Bracket

PD10 Fiber Adapter Bracket

A mounting bracket is needed to connect most power and energy sensors to a fiber adapter (SC, ST, FC or SMA). This bracket can be used for photodiode energy sensors in the PD10 series.

Nova PE-C Adapter

Nova PE-C Adapter

The adapter plugs between the Nova D15 socket and the smart plug of the PE-C sensor to allow the Nova to operate with PE-C series sensors. See PE-C spec sheet for details.

PE-C to PE Size Adapter

PE-C to PE Size Adapter

The newer PE-C series sensors have a φ62mm diameter.
The older PE series sensors have a φ85mm diameter. This
adapter allows using the PE-C type sensors in jigs and
setups that were originally designed for PE sensors.

3m cable

3m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

5m cable

5m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

10m cable

10m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

12m cable

12m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.